62
Lock Pin
Weight: 0.018 kg
1.Remove stop ring and
replace lo
ck nut with
aluminum lo
ck knob.
2.Reinstall stop ring.
3.Install handknob until
contact is made
with the sto
p ring.
4.Insert pins in the cover
so
that they proj
ect
thru the co
ver.
5.Put the cover on with
inserted pins and drive
pins in until flush with
the co
ver.
J
The installation of this kit is permanent. It cannot be
the J Control kits until touching lock nut. Finally, insert
the dimension are only
They can be adjusted within their specified range not
permanent. Once assembled to the
CARTRIDGE CONTROL OPTIONS
Rev.200914
J.990.102
or disassembled.
UNIT:mm
Control Kit, Max. Setting Limiter
"the maximum setting limitation C spring" and then turn
Three-winged Handknob Kit
maximum allowance pressure or flow, first to take off
Winner's cartridges.
Weight: 0.049 kg
Order Code
The appearance and
to exceed the new permanent maximum setting.
UNIT:mm
Order Code
T
This control kit can be used on most of
readjusted or dissassembled.
the pins and drive pins in until flush in J Control kits.
7ZAT001
for reference.
7ZAS001
The J Control kits use for the setting of the cartridges.
cartridge, it cannot be easily readjusted
The J Control kits use for the setting of the cartridges.
After leakproof hex. socket screw is set to the
The installation of this kit is intended to be
The appearance and
the dimension are only
for reference.
3/8''-24UNF-2A
Steel Locknut
Lock Pin
J Control nut in steel
Max.pressure
、
flow setting limited
C ring
Handknob
Aluminum
Plastic Cover
Locknut
Lock Pin
flow setting limited
C ring
Max.pressure
、
Plastic
3/8''-24UNF-2A
